Loading ...
Loading ...
Loading ...
26
9 Product specifications
Note
• Specications and design are subject to change
without notice.
Media formats
• Picture les, MP3 media, WMA media,
DivX Plus HD media, USB storage device
File formats
• Audio: .aac, .mka, .mp3, .wma, .wav, .mp4, .m4a
• Video:
• .avi, .divx, .mp4, .mkv, .asf, .wmv, .mpg,
.mpeg, .mov, .m4v
• .rmvb, .rm (Available only in Asia
Pacic and China)
• Picture: .bmp, .jpg, .jpeg, .gif, .png
Audio formats
Your SoundBar supports the following audio les.
Extension Container Audio
codec
Bit rate
.mp3 MP3 MP3 32 kbps ~
320 kbps
.wma ASF WMA 64 kbps ~
160 kbps
.aac AAC AAC, HE-
AAC
192 kbps
.wav WAV PCM 1.4 Mbps
.m4a MKV AAC 192 kbps
.mka MKA PCM 27.648
Mbps
.mka MKA Dolby
Digital
640 kbps
.mka MKA DTS core 1.54 Mbps
.mka MKA MPEG 912 kbps
.mka MKA MP3 32 kbps ~
320 kbps
.mka MKA WMA 64 kbps ~
160 kbps
.mka MKA AAC, HE-
AAC
192 kbps
Update software through USB
What you need
• A USB ash drive, with at least 75MB of
memory. The USB ash drive must be FAT or
NTFS formatted. Do not use a USB hard drive.
• A computer with Internet access.
• An archive utility that supports the ZIP
le format (for example, WinZip® for
Microsoft® Windows® or Stuft® for
Macintosh®).
Step 1: Download the latest software
1 Connect a USB ash drive to your computer.
2 In your web browser, go to www.philips.
com/support.
3 At the Philips Support website, nd your
product and locate the Software and drivers.
» The software update is available as a zip
le.
4 Save the zip le in the root directory of
your USB ash drive.
5 Use the archive utility to extract the
software update le in the root directory of
the USB ash drive.
» The les are extracted under the root
directory of your USB ash drive.
6 Disconnect the USB ash drive from your
computer.
Step 2: Update the software
1 Connect the USB ash drive to your SoundBar.
2 Switch your TV to the correct source for
your SoundBar.
3 Press (Home), and then select [Setup].
4 Select [MISC] > [USB Upgrade].
5 Follow the instructions on the TV to
conrm the update.
» When the software update is complete,
the SoundBar automatically switches off
and restarts. If it does not, disconnect the
power cord for a few seconds, and then
reconnect it.
Note
• When the software update is in progress, do
not turn off the power or remove the USB
ash drive.
EN
Loading ...
Loading ...
Loading ...