HP K7V40A#B1H OfficeJet 3830 All-in-One Wireless Printer

User Manual - Page 72

For K7V40A#B1H. Series: 3830

PDF File Manual, 188 pages, Read Online | Download pdf file

K7V40A#B1H photo
Loading ...
Loading ...
Loading ...
5. A message appears stating that this setting should not be changed unless you have multiple numbers
on the same telephone line. Touch Yes to continue.
6. Do one of the following:
Touch the ring pattern assigned by your telephone company to fax calls.
Touch Ring Pattern Detection, and then follow the instructions on the printer control panel
display.
NOTE: If the Ring Pattern Detection feature cannot detect the ring pattern or if you cancel the feature
before it nishes, the ring pattern is automatically set to the default, which is All Standard Rings .
NOTE: If you are using a PBX phone system that has dierent ring patterns for internal and external
calls, you must call the fax number from an external number.
Set the dial type
Use this procedure to set tone-dialing or pulse-dialing mode. The factory-set default is Tone. Do not change
the setting unless you know that your phone line cannot use tone dialing.
NOTE: The pulse-dialing option is not available in all countries/regions.
To set the dial type
1. From the Home screen, touch Fax .
2. Touch Setup , and then touch Preferences .
3. Touch Dial Type.
4. Touch to select Tone or Pulse.
Set the redial options
If the printer was unable to send a fax because the receiving fax machine did not answer or was busy, the
printer attempts to redial based on the settings for the redial options. Use the following procedure to turn the
options on or o.
Busy redial: If this option is turned on, the printer redials automatically if it receives a busy signal. The
default is On.
No answer redial: If this option is turned on, the printer redials automatically if the receiving fax
machine does not answer. The default is O .
Connection problem redial: If this option is turned on, the printer redials automatically if there has been
a problem connecting with the receiving fax machine. Connection problem redial works only for sending
faxes from memory. The default is On.
To set the redial options
1. From the Home screen, touch Fax .
2. Touch Setup , and then touch Preferences .
3. Touch Auto Redial .
4. Touch Busy Redial , No Answer Redial , or Connection Problem Redial to turn it on or o.
66 Chapter 6 Fax ENWW
Loading ...
Loading ...
Loading ...