1. Home
  2. Fisher & Paykel
  3. Fisher & Paykel WH1160P3 User Manual
  4. Page 6

User Manual - Page 6

For WH1160P3. Also, The document are for others Fisher & Paykel models: WH1260P1, WH1060P1

Loading ...
Loading ...
Loading ...
6
SAFETY AND WARNINGS
Installation
z
For guidance on how to install your product, please refer to installation instructions
contained in this document.
z
Install the washer on a solid and level floor surface ensuring it has at least 20mm
clearance on each side. The washer must not be installed on any textured floor
coverings (eg carpet, rugs).
z
This washer must not be installed or operated on a plinth.
Water supply requirements:
z
Inlet water pressure: Max. 1MPa (145psi), Min. 30kPa (4.5psi)
z
Inlet water flow rate: Min. 6litres/minute
z
A pressure-reducing valve must be installed if pressure is higher than 1MPa.
z
For optimum wash performance check the supply pressure is within the
recommendedrange.
z
New hose sets provided with the washer should be used to connect the washer to the
water mains. Old hose sets should not be re-used.
z
We recommend the inlet hose(s) are changed every 5 years. WARNING: Failure to do
so may result in a flood and damage to property.
z
The hot water temperature should not exceed 65°C and the cold water temperature
not exceed35°C. Temperatures above these may cause the washer to fault or cause
damage to the washer.
MODEL CODE MAXIMUM CAPACITY* (KG)
WH1060P1 10
WH1160P3 11
WH1260P1 12
*Capacity refers to the maximum dry weight of items the washer can wash at any one time
z
Read and follow the detergent manufacturers’ instructions carefully. Instructions on
how to use the detergent will be clearly indicated on the pack. Remember to store your
detergents out of the reach of children.
z
Do not wash an electric blanket in your washer unless the care label specifically states
it is safe to do so.
z
Do not wash curtains in this washer, as sunlight makes them brittle and they may
disintegrate during washing.
z
The only user-removable parts of the washer are the inlet hose(s) and dispenser. No
other parts are designed to be removed by anyone other than a Fisher&Paykel trained
and supported service technician
z
Do not overload your washing machine beyond its rated capacity.
Disposal
z
When disposing of the washer, it is recommended that the door is removed to
avoidchildren getting trapped inside, and that the electrical cable is cut off
close to thewasher.
Loading ...
Loading ...
Loading ...