Loading ...
Loading ...
Loading ...
17
BEFORE YOUR FIRST WASH
Check you have done everything you need to before you start your first wash:
Have the packaging and transit bolts and rods been removed?
Is the washer correctly levelled, feet are extended and cabinet corners are clear of
the floor?
Is the drain hose threaded through the hose guide ‘U bend’ (with no more than
20mm extended) and hooked into your standpipe or tub, or attached to a spigot?
Have the taps been turned on?
Is the hot hose connected to the hot valve marked ‘H’?
Is the cold hose connected to the cold valve marked ‘C’?
Have you performed the test cycle? Refer to ‘Installation guide’ page 15.
Has the power cord been connected to an appropriate power supply and the power
turned on?
Complete a DRUM CLEAN cycle with a half-load amount of detergent and
without a load in order to remove any residues remaining in the washer from the
manufacturing process.
Loading ...
Loading ...
Loading ...