Loading ...
Loading ...
Loading ...
INSTALLATION GUIDE
16
If there are any problems, you must address these before proceeding with normal use. The
washer will automatically turn off at the end of the cycle if there are no problems.
3
Press to start.
4
Wait until you see water in the bottom of
the drum.
Press to stop the cycle, then press
to turn the washer off.
Press
POWER again, select the SPIN cycle
and press .
Check the drain hose is firmly secured to the
standpipe or tub, or spigot.
Observe that the washer pumps out the
water, and spins.
The washer will beep to signal the end of
the cycle. Any faults will be displayed on the
screen, refer to ‘Fault codes’.
5
6
Loading ...
Loading ...
Loading ...