Loading ...
Loading ...
Loading ...
www.LaViewSecurity.com 25
Conguring General
Network Settings
Purpose:
Network settings must be properly congured
before you operate DVR over network.
Steps:
1. Enter the Network Sengs interface.
Menu >Conguraon>Network
2. Select the General tab.
Network Settings Interface
3. In the General Settings interface,you
cancongurethefollowingsettings:NIC
Type,IPv4Address,IPv4Gateway,MTU
andDNSServer.
IftheDHCPserverisavailable,youcan
checkthecheckboxnexttoDHCP to
automatically obtain an IP address and
other network settings from that server.
4. Afterconguringthegeneralsettings,
click Apply to save the settings.
Conguring advanceed
Settings
Conguring DDNS
Purpose:
If your DVR is set to use PPPoE as its default
network connection, you may set Dynamic DNS
(DDNS)tobeusedfornetworkaccess.
Prior registration with your ISP is required before
conguringthesystemtouseDDNS.
Steps:
1. EntertheNetworkSettingsinterface.
Menu >Conguraon>Network
2. Select the DDNS tabtoentertheDDNS
Settings interface.
DDNS Settings Interface
3. Check the DDNS checkboxtoenablethis
feature.
4. Select DDNS Type.FivedierentDDNS
typesareselectable:IPServer,DynDNS,
PeanutHull,NO-IPandHiDDNS.
Conguring NTP Server
Purpose:
A Network Time Protocol (NTP) Server can be
conguredonyourDVRtoensuretheaccuracyof
systemdate/time.
Steps:
1. EntertheNetworkSettingsinterface.
Menu >Conguraon>Network
2. Select the NTP tabtoentertheNTP
Settings interface.
NTP Settings Interface
3. Check the Enable NTPcheckboxto
enable this feature.
4. CongurethefollowingNTPsettings:
• Interval: Timebetweenthetwo
synchronizingactionswithNTP
server.Theunitoftimeisin
minutes.
• NTP Server: IPaddressofNTP
server.
• NTP Port: PortofNTPserver.
5. Click the Apply button to save settings
andexittheinterface.
Note: The me synchronizaon interval can be
set from 1 to 10,080 min, and the default value is
Loading ...
Loading ...
Loading ...