Loading ...
Loading ...
Loading ...
www.LaViewSecurity.com 13
Conguring Encoding
Parameters
Purpose:
By conguring the encoding parameters you can
adjustimagequality,throughchangingtransmission
streamtype,resolution.etc.
Before you start:
Make sure that the HDD has already been installed.
If not, please install a HDD and initialize it.
(Menu>HDD>General)
HDD-General
Check the storage mode of the HDD:
Click Advanced to check the storage mode of the
HDD.
If the HDD mode is Quota,pleasesetthemaximum
record capacity and maximum picture capacity.
For detailed information, see Chapter Conguring
Quota Mode.
If the HDD mode is Group, you should set the
HDDgroup.Fordetailedinformation,seeChapter
Conguring HDD Group for Recording.
HDD-Advanced
Steps:
EntertheRecordsettingsinterfacetocongurethe
encoding parameters:
Menu>Record>Encoding
RecordEncoding
EncodingParametersforRecording
Select Record tab page to congure stream type,
resolution,andotherparametersasneeded.
Pre-record: The amount of time to be recorded
priortoanalarm-triggeredevent.Forexample,if
youset thepre-record timeas5 seconds,when an
alarmtriggersrecordingat10:00,thecamerasaves
video starting at 9:59:55.
Post-record:Thetimeyousettoberecordedafter
the event. For example, if you set the post-record
time as 5 seconds, when an alarm triggered the
recordingendsat11:00,itcontinuesrecordingtill
11:00:05.
Expiration Time: Expired time, is the amount of
timeforarecordletobekeptintheHDD.Ifthe
deadlineisreached,thelewillbedeleted.Youcan
settheexpiredtimeto0,andthenleswillneverbe
deleted.Storagetimeforlesshouldbedetermined
by the capacity of the HDD.
Redundant Record: Enabling redundant record
means the recording is saved in the redundant HDD.
See Chapter Conguring Redundant Recording.
Record Audio: Check the checkbox to enable or
disable audio recording.
Click Apply to save the settings.
EncodingParametersSettingsforSub-stream
EntertheSub-streamtabpage.
Sub-streamEncoding
Conguretheparametersofthecamera.
Click Apply to save the settings.
Conguring Record
Schedule
Purpose:
Set the recording schedule for the camera to
automatically start/stop recording according to the
conguredschedule.
Steps:
EntertheRecordScheduleinterface.
Loading ...
Loading ...
Loading ...