Loading ...
Loading ...
Loading ...
©2020 Hestan Commercial Corporation
16
EN
TROUBLESHOOTINGTROUBLESHOOTING
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
Ignition will not operate
• Is the power supply cord unplugged?
Plug into a grounded 3 prong outlet.
• Has a household fuse been blown or has the circuit breaker been tripped?
Replace the fuse or reset the circuit breaker.
Surface burners will not operate
• Is this the first time the surface burners have been used?
Turn on any one of the surface burner knobs to release air from the gas lines.
• Is the control knob set correctly?
Push in knob before turning to a setting.
• Are the burner ports clogged?
See “Sealed Surface Burners” section.
Surface burner flames are uneven yellow and/or noisy
• Are the burner ports clogged?
See “Sealed Surface Burners” section.
• Are the burner caps positioned properly?
See “Sealed Surface Burners” section.
• Is propane gas being used?
The appliance may have been converted improperly. Contact a service technician.
Surface burner makes popping noises
• Is the burner wet?
Let it dry.
• Is the cap and gas spreader positioned correctly?
Make sure the alignment pins are properly aligned
See “Sealed Surface Burners” section.
Excessive heat around cookware on cooktop
• Is the cookware the proper size?
Use cookware about the same size as the surface cooking area, element or surface burner.
Cookware should not extend more than 1 in (2.5 cm) outside the cooking area.
Cooktop cooking results not what expected
• Is the proper cookware being used?
See “Cookware” section.
• Is the control knob set to the proper heat level?
See “Controls and Burners” section.
CARE & MAINTENANCE
(CONTINUED)
Loading ...
Loading ...
Loading ...