Loading ...
Loading ...
Loading ...
©2020 Hestan Commercial Corporation
9
EN
REGULATORY / CODE REQUIREMENTS
Installation of this cooking appliance must be made in accordance with local codes. In the
absence of local codes, this unit should be installed in accordance with the National Fuel
Gas Code
ANSI Z223.1/NFPA 54
, Natural Gas and Propane Installation code
CSA B149.1
, or
Propane Storage and Handling Code
B149.2
.
All Electrical Components must be electrically grounded in accordance with local codes or
in the absence of local codes with the National Electrical Code
ANSI/NFPA 70
, or Canadian
Electrical code
CSA C22.1
.
STATE OF MASSACHUSETTSSTATE OF MASSACHUSETTS
Massachusetts requires all gas be installed using a plumber or gas fitter carrying the appropriate
Massachusetts license. All permanently installed natural gas or propane installations require a
T-handle type manual gas valve be installed in the gas supply line to this appliance. Flexible gas
connector must not be longer than 36” [91.4 cm].
CALIFORNIA PROPOSITION 65 - WARNING CALIFORNIA PROPOSITION 65 - WARNING
WARNINGWARNING This product can expose you to chemicals including carbon monoxide,
which is known to the State of California to cause birth defects or other reproductive
harm. For more information, go to www.P65Warnings.ca.gov.
RATING LABEL
There are two rating labels on the unit. The main label contains important information about your
Hestan appliance such as the model and serial number, gas type and electrical rating.
Both rating labels are located in the bottom of the cooktop unit. Make sure you record your
model number and serial number for future use. The second rating label contains information
about the gas requirements and usage.
If service is necessary, contact Hestan Customer Care with the model and serial number.
Figure 1.
Typical rating label
KGCXX
HESTAN COMMERCIAL CORP.
ANAHEIM, CA - USA
XXX XXXXXX
xxxxxxxxx
xxxxxxxxx
xxxxxxxxx
Figure 2.
Rating label location
Loading ...
Loading ...
Loading ...