Loading ...
Loading ...
Loading ...
21
CARE AND CLEANING
!
WARNING
Disconnect electric power to the unit before cleaning
the condenser.
Defrosting
Manual Defrost Models
This unit is a manual defrost model and will require occa-
sional defrosting. When there is build-up of 1/4” (6 mm) or
more of frost, manually defrost the unit.
DO NOT use an ice pick or other sharp instrument to help
speed up defrosting. These instruments can puncture the
inner lining or damage the cooling unit. DO NOT use any
type of heater to defrost. Using a heater to speed up de-
frosting can cause personal injury and damage to the inner
lining.
To defrost:
1. Disconnect power to the unit.
2. Remove ice bucket and discard ice.
3. Place towel or other absorbent material on bottom of ice
bin.
4. Fill the ice bucket half full with warm, not hot water. This
will help the unit defrost faster.
5. Place the ice bucket back into the unit on top of the towel
or other absorbent material.
6. Prop the door in an open position (2 in. [50 mm]
minimum).
7. After about 1 hour remove the ice bin and discard water.
8. Allow the frost to melt naturally.
9. After the frost melts completely clean the interior and all
removed components. (See INTERIOR CLEANING).
DO NOT clean ice bucket using a dishwasher. The bucket
is not dishwasher safe and will be damaged.
10.When the interior is dry, reconnect power and turn unit
on.
batches of ice after defrosting.
!
CAUTION
NOTE
NOTE
Cleaning Condenser
INTERVAL - EVERY SIX MONTHS
of dust and lint, and clean the condenser when necessary.
Depending on environmental conditions, more or less fre-
quent cleaning may be necessary.
NOTE
DO NOT use any type of cleaner on the condenser unit.
1. Remove the grille.
2. Clean the condenser coil using a using a soft brush with
a “combing” action or vacuum cleaner. Do not touch the
condenser coil.
3. Install the grille.
Loading ...
Loading ...
Loading ...