Loading ...
Loading ...
Loading ...
19
CLEANING YOUR ICE MACHINE
Ice Maker Adjustment
Ice Cube Thickness Adjustment
Interval - As Required
On ice maker equipped models, adjust the cube size by
changing water amount injected into the ice maker assem-
bly as follows:
1. Remove the ice maker assembly cover (1).
2. Find the adjusting screw on the ice maker assembly
control box (2). The adjusting screw is just below the minus
(-) and plus (+) signs on the control box.
Too large of an adjustment to the screw can cause the
damage.
3. Turn the adjusting screw toward the minus (-) sign
(clockwise) for smaller cubes or toward the plus (+) sign
(counterclockwise) for larger cubes.
4. Install the ice maker assembly cover.
Figure 41
!
CAUTION
Adjusting Ice Harvest
1. Remove the front grille
(3) a small increment clockwise for a COLDER setting
(slower ice production) or counterclockwise for a WARMER
setting (faster ice production).
3. Reinstall the front grille (one screw).
Figure 42
Airow and Product Loading
-
will not perform as expected. Do not install the unit behind
a door.
NOTE
Figure 43
Loading ...
Loading ...
Loading ...