Loading ...
Loading ...
Loading ...
13
DOOR REVERSAL
Reversing the Door
MLCR215, MACR215 & MOCR215
Location of the unit may make it desirable to mount the
door on the opposite side of the cabinet.
The hinge hardware will be removed and reinstalled on the
opposite side of the cabinet.
TO REVERSE THE DOOR
Remove top hinge door:
1. Remove hinge cover from top of unit.
2. Hold door to keep it from falling.
3. Remove top hinge from cabinet using a Torx T-25 screw-
driver to remove three screws.
install the pivot screw in the same hole from the opposite
surface.
Figure 19
Figure 20
Figure 21
hinge. Retain shoulder washers; they will be reused.
6. Remove three screws from hinge holes on the opposite
side. Reinstall into holes where the hinge was removed.
Take care not to scratch the cabinet.
Remove bottom hinge:
1. Remove bottom hinge from cabinet using a 1/4” socket
Figure 22
2. Remove corresponding screws on opposite side of
cabinet. On some models there may be a nut behind one or
both screws on either side.
Install bottom hinge:
Install two or three screws, depending on model. Replace
nuts if used.
Figure 23
Loading ...
Loading ...
Loading ...