Loading ...
Loading ...
Loading ...
18
CLEANING YOUR ICE MACHINE
First Use
All controls are preset at the factory. Initial startup requires
no adjustments.
Marvel recommends discarding the ice produced during the
scale that may dislodge from the water line.
Press the rocker switch located inside the door on the front
panel, or behind the grille.
Ice
When the ice bucket is full, the ice making mechanism will
cool and maintain the ice supply.
Do not place cans or bottles in the ice compartment because
they will freeze.
To turn o ice production:
Raise the bin arm into an upright and locked position. The
unit will preserve temperature for ice storage.
NOTE
Figure 39
NOTE
Figure 40
NOTE
Certain sounds are normal during the unit’s operation. You
may hear the compressor or fan motor, the water valve, or
ice dropping into the ice bucket.
!
CAUTION
NEVER use an ice pick, knife or other sharp instrument to
separate cubes. Shake the ice bucket instead.
During periods of limited use or high ambient temperatures,
it is common for cubes to fuse together. Gently shake the
bucket to break apart cubes. If not using the ice maker
regularly, empty the ice bucket periodically to ensure fresh
cubes.
It is normal for cubes to appear cloudy. The cause is air
trapped in the water because of fast freezing. It is not
caused by the health, taste or chemical make up of the
water. It is the same air that is in every glass of water you
drink.
Remove the ice bucket for emptying and cleaning. To
remove the ice bucket, raise the bin arm and remove the
bucket from the ice compartment. Use the ice bucket for ice
storage only.
Loading ...
Loading ...
Loading ...