Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 89
Liftgate Close Button
ADJUSTABLE POWER LIFTGATE HEIGHT
The maximum height that the liftgate will open can
be adjusted and saved so that the liftgate will only
open to the desired height. To set a desired height,
proceed as follows:
1. Open the liftgate fully, then manually pull
down on the liftgate to the desired height.
2. Push and hold the liftgate close button,
located on the left side trim panel inside the
cargo area, for three seconds. An audible
chime will be heard to let you know the height
has been saved.
To set the saved height setting to a new setting,
proceed as follows:
1. Open the liftgate, then manually push the
liftgate upward to its full open position.
2. Manually pull the liftgate down to the new
desired height and hold the liftgate close
button for three seconds until the audible
chime is heard.
Power Liftgate Malfunction Procedure:
1. In the event of a power malfunction to the
liftgate, the liftgate can be released by
accessing the service release feature in the
latch. This can be done using a 3 mm
diameter screwdriver.
Liftgate Service Release
2. From inside the gate, an eyelet can be seen.
Place the screwdriver in the eyelet.
3. Rotate the screwdriver handle to actuate the
lever and release the latch.
4. If liftgate is left open for an extended period of
time, the liftgate may need to be closed
manually to reset power liftgate functionality.
2
22_WL_OM_EN_USC_t.book Page 89
Loading ...
Loading ...
Loading ...