Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 69
Rear Climate Control Button
Press and release this button on the
climate control touchscreen to access
the rear climate controls. The Rear
Climate indicator will illuminate when the
rear climate controls are ON.
Driver And Passenger Temperature
Switches
These switches provide the driver and passenger
with independent temperature control.
Lift the driver’s or passenger’s side
toggle switch on the faceplate upward, or
press and slide the temperature bar
towards the red arrow button on the
touchscreen for warmer temperature settings.
Depress the driver’s or passenger’s side
toggle switch on the faceplate downward,
or press and slide the temperature bar
towards the blue arrow button on the
touchscreen for cooler temperature settings.
SYNC Button
Press the SYNC button on the
touchscreen to toggle the SYNC feature
on/off. The SYNC indicator illuminates
when SYNC is on. SYNC is used to
synchronize the front passenger temperature and
rear passenger temperature, mode, and blower
settings with the driver temperature, mode, and
blower settings. Changing the front passenger
temperature or rear passenger temperature,
mode, and blower settings while in SYNC will
automatically exit this feature.
NOTE:
The SYNC setting is only available on the touch-
screen.
Blower Control
Blower Control is used to regulate the
amount of air forced through the Climate
Control system. There are several blower
speeds available.
Blower speed can be controlled by lifting blower
toggle on the instrument panel to increase blower
speed, or depress the toggle for lower blower
speed.
The speed can also be selected using the blower
control buttons on the touchscreen. Use the small
blower icon to reduce the blower setting and the
large blower icon to increase the blower setting.
Blower speed can also be selected by pressing the
blower bar area between the icons on the
touchscreen.
Mode Control
Select Mode by pressing one of the Mode
buttons on the touchscreen, or the
faceplate, to change the airflow
distribution mode. The airflow
distribution mode can be adjusted so air comes
from the instrument panel outlets, floor outlets,
defrost outlets and demist outlets.
Panel Mode
Air comes from the outlets in the
instrument panel. Each of these outlets
can be individually adjusted to direct the
flow of air. The air vanes of the center
outlets and outboard outlets can be moved up and
down or side to side to regulate airflow direction.
There is a shut-off wheel located next to the air
vanes to shut off or adjust the amount of airflow
from these outlets.
2
22_WL_OM_EN_USC_t.book Page 69
Loading ...
Loading ...
Loading ...