Loading ...
Loading ...
Loading ...
➔ Turn the rotary to “BEVERAGES RECIPES’’. Press the rotary.
➔ Turn the rotary to “CAPPUCCINO’’. Press the rotary.
➔ Turn the rotary to “LIVE PROGRAMMING’’.
➔ Place a cup or glass underneath the outlet (picture 5).
Information: Should you wish to cancel the Live programming after the start, hold the rotary down for
longer than three seconds.
➔ To change the standard setting press the rotary for longer than three seconds.
The display shows “SELECT STRENGTH’’.The display shows “SELECT STRENGTH’’.
➔ Turn the rotary to select the strength of your choice. Weaker to the left and stronger to the right.
➔ Press the rotary to conrm the choice of your strength.
The display shows “SELECT FLAVOUR’’.
➔ Turn the rotary to select the avour of your choice (for explanation of the avour proles see
point3.3).
➔ Press the rotary to conrm your choice of avour.
The display shows “PLEASE PLACE CUP UNDERNEATH COFFEE OUTLET’’.
➔ Place a cup or a glass underneath the coffee outlet.
The display shows “PLEASE WAIT’’. The device is grinding, heating and will then start with the
preparation.
First, the coffee is prepared.
The display shows “STOP COFFEE?’’
➔ Press the rotary when the desired amount of coffee is prepared.
Information: If you only want to prepare milk froth (without coffee) , so turn the rotary to
“SETTINGS”, “BEVERAGE RECIPES”, “MILK FROTH” and proceed as described in the following steps.
After the coffee part of the Cappuccino is prepared, the display shows “PLEASE PLACE CUP
UNDERNEATH MILK FROTHER’’.
➔ Place the cup underneath the milk frother (picture 1/P)
Warning: Ensure that the tap of the spumatore is upright. This is how the frothed up milk is created.
The display shows “OPEN VENT’’.
➔ Turn the steam-hot water- rotary knob (picture 1/C) clockwise up to the stop.
Warning: First, water comes out off the spumatore, then the milk froth.
The display shows “STOP MILK FROTH?’’
➔ Press the rotary when the desired amount of milk froth is prepared.
The display shows “CLOSE VENT’’
➔ Close the steam- hot water - rotary knob anticlockwise.
Information: Wait for the last milk drops before you remove the cup.
The standard setting for CAPPUCCINO is now changed and saved. The display shows “RECIPE
CREATED’’ for a short amount of time and returns to the main menu with the new standard settings.
4.3.2. Manual programming for Cappuccino and milk froth
You can also change the standard setting manually as follows.
➔ Choose the menu option “SETTINGS’’ in the main menu by turning the rotary and then pressing
the rotary.
19
4. Prepare coffee specialities
Loading ...
Loading ...
Loading ...