Loading ...
Loading ...
Loading ...
➔ Open the steam- hot water - rotary knob clockwise. The display shows
“SYSTEM FILLING”.
The system is now being lled with water and heated subsequently. Water may emerge from the
steam- hot water jet / spumatore (picture 1/P).
➔ Close the steam- hot water - rotary knob anticlockwise.
The display shows “PLEASE RINSE’’.
➔ Press the right rotary. The display shows “SYSTEM RINSING’’.
When the appliance is ready for use, the display shows the main menu.
At the rst preparation: If you are preparing coffee for the rst time, the grinding chamber is still empty.
It is possible that the appliance is not preparing any coffee and that the display is showing “FILL
BEANS’’ after the rst grinding process.
➔ Follow the notes on the display and, in this case, press the rotary once again.
The process is being repeated.
2.5. Turn on appliance during operation
If you have carried out the rst start during the initial set up (point 2.4), proceed as follows for the
following power ups:
➔ Turn the appliance on with the On/Off switch (picture 1/H).
The display shows the notication “NIVONA, SYSTEM HEATING’’.
When the appliance is heated, the display shows “PLEASE RINSE’’.
➔ Press the rotary.
The system is now being rinsed. The display shows “SYSTEM RINSING’’. Afterwards the appliance is
ready to operate. The display shows the main menu (picture 1/A).
Information: When you do not use the device for a longer period (i.e due to a holiday), turn off the
device with the On/Off switch (picture 1/H) and pull the plug.
Information: For each coffee speciality a factory setting is set. Thus, you can get the coffee immediately (see
point 4.). However, we recommend that you alter the basic settings according to your wishes in advance
(see point 3).
2.6. ECO-Mode
When you do not use the rotary for a longer period, the appliance switches to ECO-mode. The display
shows “ENERGY SAVING’’.
➔ By pressing the rotary, you exit the ECO-mode.
The display shows the main menu.
3. Take/change basic settings
Information: For each coffee speciality a factory setting is set. Hence, you can get coffee immediately
(see point 4.). However, we recommend to change the basic settings according to your individual
wishes in advance.
➔ To change the basic settings, choose the menu option “SETTINGS’’ in the main menu by turning
the rotary.
➔ You get to the menu “SETTINGS’’ by pressing the rotary.
➔ Choose the menu option in “SETTINGS’’, which you would like to change, by turning the rotary.
➔ You get to the chosen menu option by pressing the rotary.
➔ You change the respective setting in the respective menu option by turning the rotary.
10
2. Set up / 3. Take/change basic settings
Loading ...
Loading ...
Loading ...