Loading ...
Loading ...
Loading ...
➔ You conrm the chosen setting by pressing the rotary.
➔ By choosing “EXIT’’ and then pressing the rotary, you get to the next menu level above: From the
chosen setting via the menu “SETTINGS’’ to the main menu.
3.1. Set the operation with or without lter
➔ To change the operation to with or without lter, chose the menu option “SETTINGS’’ in the main
menu by turning the rotary and then press the rotary.
➔ Chose the option “FILTER’’ in “SETTTINGS’’ by turning the rotary.
Operate the appliance with lter: Please follow the procedure under point 2.4.1.
Operate the appliance without lter: Please follow the procedure under point 2.4.2
➔ You can carry on directly with the programming of further setting from this position or you can
leave the setting with choosing “EXIT’’ and then pressing the rotary.
3.2. Set water hardness
➔ To change the water hardness, choose the menu option “SETTINGS’’ in the main menu by turning
the rotary and then press the rotary.
➔ Choose the option “WATER HARDNESS’’ in “SETTINGS’’ by turning the rotary.
Please follow the procedure in point 2.4.3 afterwards.
➔ You can carry on directly with the programming of further setting from this position or you can
leave the setting with choosing “EXIT’’ and then pressing the rotary.
3.3. Choose the avour
Depending on your wish, you can choose the avour. Thus, you can change the avour of your coffee
as desired. For this, there are three proles for the ow velocity of the water through the coffee
grounds on le under option “FLAVOUR’’. Prole 1 “DYNAMIC’’ ensures a dynamic ow, Prole 2
“CONSTANT’’ a constant ow and Prole 3 “INTENSE’’ ensures a intensive ow. The factory setting is
“INDIVIDUAL’’, viz. you can change your avour setting individually for each coffee recipe. However,
should you choose a Flavour Prole 1, 2 or 3 at this point, it will apply for all coffee specialities.
Tip: Test your favourite avour prole on one of the beverages.
➔ To change the avour setting, choose the menu option “SETTTINGS’’ in the main menu by turning
the rotary and then press the rotary.
➔ Turn the rotary to “FLAVOUR’’. Press the rotary.
➔ Turn the rotary to the avour prole of your choice.
➔ Press the rotary to conrm your setting.
➔ You can carry on directly with the programming of further setting from this position or you can
leave the setting with choosing “EXIT’’ and then pressing the rotary.
3.4. Set temperature
You can set the temperature for coffee, mild and hot water to
“NORMAL”, “HIGH”, “MAXIMUM” or “INDIVIDUAL” as desired. The factory setting is “HIGH’’.
When you have set the temperature as described below, it will apply for all coffee specialities.
However, you can set the temperature to “INDIVIDUAL’’ for each coffee speciality (see point 4
below). Then, choose the setting “INDIVIDUAL’’ in this menu as follows:
11
3. Take/change basic settings
Loading ...
Loading ...
Loading ...