Loading ...
Loading ...
Loading ...
➔ If the app has not connected itself, click on the small symbol for the fully automatic machine of
the app, in the top right. A list with available fully automatic machines or their serial numbers
appears. Select the serial number of your device ( see serial number on type label picture 1/S).
➔ Turn the rotary to “DEACTIVATE’’ to cancel the connection to your smartphone or to disallow it.
➔ Press the rotary to conrm your setting.
➔ You can carry on directly with the programming of further setting from this position or you can
leave the setting with choosing “EXIT’’ and then pressing the rotary.
4. Prepare coffee specialities
Your NIVONA appliance offers you diverse possibilities to prepare speciality coffees to your individual
wishes. The most important control elements and their basic function are mostly identical for the
different coffee specialities:
• On/Off switch (picture 1/H): By pressing you turn the appliance on, by pressing once more you
turn it off again.
• Rotary - Turn -Press - Selector (short Rotary) (picture 1/B): Select your favourite beverage in the main
menu by turning the rotary. By pressing the rotary in the main menu, the beverage preparation
starts. During the preparation of the beverage, you can alter the strength and amount of your
coffee with the rotary. The changeable value ashes respectively.
• Steam-Hot water-Rotary knob (picture 1/C): When the display shows “ Open vent’’, place a container
underneath the steam-hot water jet / the spumatore prior to use. You open the vent for the hot
water or steam supply, by turning it clockwise up to the stop. You stop the supply, by turning it
anticlockwise up to the stop.
• Steam-Hot water Jet/Spumatore (picture 1/P): Is the tap of the spumatore upright with open steam-hot
water rotary knob (picture 1/C), foamed milk or hot water are made depending on the choice of
beverage. The milk tube is rinsed, when the tap of the spumatore ishorizontal with open steam-hot
water rotary knob (picture 1/C).
• Height-adjustable spout (picture 1/E): By moving up or down, you adjust the spout to the height
of your cups or glasses. Grab the spout between thumb and index nger and move it up or down
(picture 11).
• Milk container (only designs 670 and 680): Fill the milk container with fresh, cold, low fat milk.
Close the lid of the milk container and connect the suction tube with one end to the milk container
and with the other end to the milk frother/spumatore.
Information: The display shows the current setting of the selected coffee specialities in the lower row.
The strength is displayed on the left, the avour prole in the middle and the amount on the right.
Each coffee speciality can be prepared in two different ways:
a) You either change the setting at each preparation individually as described in 4.1. The standard
setting will remain in the process.
b) Or you adopt the standard settings from the menu “BEVERAGE RECIPES’’ in the menu “SETTINGS’’.
There, factory default settings are stored, which you can change individually according to your
preferences, as described in 4.2. to 4.5.
At the rst preparation: If you are preparing coffee for the rst time, the grinding chamber is still
empty. It is possible that the appliance is not preparing any coffee and that the display is showing
“FILL BEANS’’ after the rst grinding process.
➔ Follow the notes on the display and, in this case, press the rotary once again.
14
3. Set/change basic settings / 4. Prepare coffee specialities
Loading ...
Loading ...
Loading ...