Loading ...
Loading ...
Loading ...
52
Click for contents
Network: Network
PPPoE: Allows your DVR to be directly connected to a DSL modem. When
selecting this option, you need to input the user name, password and DNS
settings for your internet service provider.
DHCP (Dynamic Host Configuration Protocol): Your router will automatically
assign an IP address to each device connected to your network. This is ena-
bled by default.
Static: All devices on your network have their IP address manually defined.
Server Port: This port number is used by your DVR to send information
through. The default number will work in most situations.
HTTP Port: This port number is used to log into your DVR from a remote lo-
cation. The default number will work in most situations.
The following five options can be changed when selecting Static:
IP Address: Each device on your network must have a unique IP address. A
typical address might be “192.168.1.24” or something similar.
Subnet Mask: This allows the flow of network traffic between hosts to be
segregated based on a network configuration. A typical address might be
“255.255.255.0” or something similar.
Gateway: This allows your DVR to connect to the internet. This is typically the
same IP address as your modem or router.
DNS (Domain Name System)1/2: Input the DNS settings for your internet
service provider.
(continued on next page)
· Don’t forget to click “Save”
to apply settings.
· Click the “Default” button to
revert back to default settings.
· Click the “Close” button to
exit the Main Menu.
As SwannLink Peer-to-
Peer technology is uti-
lised to communicate
with your network and
mobile device, config-
uration of the network
settings is not required.
If you have networking
expertise and require
specific settings for
your network, your DVR
does have the ability to
change them.
Loading ...
Loading ...
Loading ...