Loading ...
Loading ...
Loading ...
20
21
Familiarize yourself with emergency stop procedures before
using the Tread+.
CAUTION The Tread+ will function only when the safety
key is present and fully engaged. Do not lose the safety key.
Always store the safety key away from the Tread+ and
out of reach of children.
SAFETY KEY
y Detach the magnetized clip from the center rail and clip it to a
tight-tting piece of clothing.
y If the safety key is detached, the slat belt will immediately stop
moving and the Tread+ will lock.
y The Tread+ will be disabled until the key is reattached.
y To start running again, reattach the safety key.
y Always remove the Safety Key and store it in a separate
location out of the reach of children when the Tread+ is
not in use.
y To reattach the Safety Key, insert the magnet end into the
gap under the center button, run the cord through the groove
around the center button, and place the clip next to the magnet.
USING THE TREAD+
y Hold the top and bottom of the screen and tilt back
or forward.
y You should be able to look at the screen comfortably, without
tilting your head up or down, from the middle of the platform.
ADJUSTING THE TOUCHSCREEN
y When the Tread+ is powered on but inactive, press to wake.
y When the Tread+ is active but not in use, press and hold for
three seconds to sleep.
y When the Tread+ walking belt is in motion, press to stop.
CENTER BUTTON
WEB VERSION
Loading ...
Loading ...
Loading ...