Loading ...
Loading ...
Loading ...
3 Press the TIME/SLICES button and use
the dial to select your time up to 2 hours.
Time will adjust in 1-minute increments
under 1 hour and 5-minute increments
over 1 hour.
4 Press the TEMP/SHADE button and use
the dial to set temperature between
180°F and 500°F. Temperature will
adjust in 5-degree increments. Set
temperature of the oven based on box
instructions. Time will cook faster than
the recommended time on the box, so
keep an eye on food while cooking.
5 Press the setting dial to begin preheating.
This can take 5 to 10 minutes.
6 When the unit beeps to signify it has
preheated, immediately open the oven
door and, using oven mitts, place pizza
on the SearPlate and slide back into
bottom rails. Close oven door.
7 Time will immediately start counting
down once the unit has signified it has
preheated. Simply turn the dial during
cooking to adjust time.
8 When cooking is complete, the unit will
beep and “END HOT” will appear on the
display.
GRIDDLE
1 To select the function, press the DUAL
HEAT MODE button then turn the dial
until GRIDDLE illuminates.
2 Press the TIME/SLICES button and use
the dial to select your time up to
30 minutes. Time will adjust in 1-minute
increments.
3 Press the TEMP/SHADE button and
use the dial to to select a temperature
between 300°F and 450°F. Temperature
will adjust in 5-degree increments. Time
will adjust in 1-minute increments.
FRESH PIZZA CONTINUED
6 When the unit beeps to signify it
has preheated, immediately open the
oven door and, using oven mitts, place
the pizza on the SearPlate and slide back
into bottom rails. Close oven door.
7 Time will immediately start counting
down once the unit has signified it has
preheated. Simply turn the dial during
cooking to adjust time.
8 When cooking is complete, the unit will
beep and “END HOT” will appear on
the display.
FROZEN PIZZA
1 To select the function, press the DUAL
HEAT MODE button then turn the dial
until FROZEN PIZZA illuminates.
2 Insert the SearPlate into the bottom rails
of the oven to let the SearPlate preheat
with oven.
USING YOUR FOODI®
DUAL HEAT AIR FRY OVEN - CONT.
NOTE: Frozen pizzas will cook 30%-50%
faster than average box recommended
time. Use box recommended
temperature. Always keep an eye out on
food while cooking.
NOTE: If preferred, place the SearPlate
on top of the unit after preheating to
load food. To slide pizza onto SearPlate
without removing, pull
3
/4 out until
you feel hook on left side of oven. This
mechanism is design to stabilize the
SearPlate if pulled out partially.
4 Insert the SearPlate into the bottom rails
of the oven to let the SearPlate preheat
with oven.
5 Press the setting dial to begin preheating.
This can take from 5 to 10 minutes.
6 When the unit beeps to signify it has
preheated, immediately open the
oven door and, using oven mitts, place
ingredients onto the SearPlate and slide
back into bottom rails. Close oven door.
7 Time will immediately start counting
down once the unit has signified it has
preheated. Simply turn the dial to
adjust time.
8 When cooking is complete, the unit
will beep and “END HOT” will appear on
the display.
AIR OVEN MODE FUNCTIONS
Press the AIR OVEN MODE button to
select the following Air Oven Mode
functions. Preheat will take 60 seconds.
Preheating with the SearPlate is not
required with these functions.
Air Fry
1 To select the function, press
AIR OVEN MODE, then turn the dial until
AIR FRY illuminates. The default time and
temperature settings will display.
2 Press the TIME/SLICES button and use
the dial to select your time up to
1 hour. Time will adjust in 1-minute
increments under 1 hour. To set the time,
press the TIME/SLICES button again.
3 Press the TEMP/SHADE button and use
the dial to select a temperature between
250˚F and 450˚F. Temperature will
adjust in 5-degree increments. To set the
temperature, press the TEMP/SHADE
button again.
NOTE: The unit preheats more quickly
on Air Oven Mode functions, so we
recommend prepping all ingredients
before turning on the oven.
NOTE: The timer will start counting
down as soon as the unit has preheated.
If ingredients are not ready to go into
the oven, simply turn the dial to add
more time.
4 Press the setting dial to begin preheating.
5 Place ingredients in the air fry basket.
If ingredients are fatty, oily, or marinated,
place the basket on the top rails and the
SearPlate on the bottom rails.
Use air fry basket for dry ingredients.
Use air fry basket with SearPlate
underneath for fatty, oily, or marinated
ingredients. When using the SearPlate
underneath, you may need to flip food
over halfway through cooking for more
even cooking.
6 When the unit beeps to signify it has
preheated, immediately slide the basket
into the upper rails of the oven. If also
using the SearPlate, slide the SearPlate
into the bottom rails.
7 For more even browning and crispiness,
flip ingredients using non-metal tongs or
spatula halfway through cooking cycle.
8 When cook time is complete, the unit
will beep and “END HOT” will appear on
the display.
10
ninjakitchen.com
11
ninjakitchen.com
NOTE: If preferred, place the SearPlate
on top of the unit after preheating
to load food. To flip or slide food onto
SearPlate, pull
3
/4 out until you feel hook
on left side of oven. This mechanism is
designed to stabilize the SearPlate if
pulled out partially.
Loading ...
Loading ...
Loading ...