Netgear WAX204-100NAS User Manual

Loading ...

Note: Make sure the country is set to the location where the device is operating.

You are responsible for complying within the local, regional, and national regulations

set for channels, power levels, and frequency ranges.

Note: It might not be legal to operate the access point/router in a region other than

the regions listed in the menu. If your country or region is not listed, check with your

local government agency.

Select the WiFi network (Wireless 1, Wireless 2, or Wireless 3).

View, enable, or change the basic WiFi settings and security settings for the selected

WiFi network.

The following table describes the fields for the WiFi network.

DescriptionSetting

Select the Enable radio button to enable the WiFi network, also referred to as a virtual

access point (VAP) or the Disable radio button to disable the WiFi network. By default, the

Wireless 1 network is enabled and the other two WiFi networks are disabled.

VAP

Select a radio button for a single band (2.4 GHz or 5 GHz) or keep the default selection,

which is the Both radio button, to enable the WiFi network to broadcast on both radio

bands.

Band

The SSID (service set identifier) is the WiFi network name. If you do not change the SSID,

the default SSID (NETGEAR-1, NETGEAR-2, or NETGEAR-3) displays. The default SSID is

also printed on the access point/router label (see Access point/router label on page 14).

Note: If you change the SSID, enter a 32-character (maximum), case-sensitive name in this

field.

Name (SSID)

User Manual63Manage the Basic WiFi and

Radio Features

AC2000 802.11ac Wireless Access Point/Router WAC124

Loading ...

Netgear WAX204-100NAS Wireless Desktop Access Point (WAX204)