Loading ...
Loading ...
Loading ...
The NETGEAR Account Login page displays.
4.
Enter your registered email address and password and click the LOG IN button.
The BASIC Home page displays.
5.
Select ADVANCED > Advanced Setup > VLAN / Bridge Settings.
The VLAN / Bridge Settings page displays.
6.
Select the Enable VLAN/Bridge group check box.
The page expands.
7.
Select the By bridge group radio button.
The page adjusts.
8.
Select the check box for the LAN port (Port 1, Port 2, Port 3, or Port 4) or WiFi radio
(WiFi-2.4G or WiFi-5G) to which the IPTV device is connected.
You must select at least one LAN port or one WiFi radio. You can select more than
one LAN port and WiFi radio.
9.
Click the Apply button.
Your settings are saved.
Router mode: Enable an IPTV bridge for a VLAN tag group
If the access point/router is in router mode and an IPTV device is connected to a LAN
port or WiFi radio, your ISP might require you to set up a bridge for a VLAN tag group
for the access point/router’s WAN (Internet) port.
If you are subscribed to an IPTV service, the access point/router might require VLAN
tags to distinguish between the Internet traffic and the IPTV traffic. A bridge with a VLAN
tag group allows packets that are sent between the IPTV device and the access
point/router WAN port to circumvent the access point/router’s NAT service, which
otherwise could drop the packets.
The access point/router includes a default VLAN tag group with the name Internet, with
VLAN ID 10, and with all LAN ports, WiFi radios, and the WAN port as members. If you
enable the IPTV bridge for a VLAN tag group, this default VLAN tag group is also
enabled.
You can add custom VLAN tag groups and assign a VLAN ID, priority value, and ports
to each VLAN tag group.
User Manual126Manage the Network Settings
AC2000 802.11ac Wireless Access Point/Router WAC124
Loading ...
Loading ...
Loading ...