Loading ...
Loading ...
Loading ...
Note: You can log in even if the access point/router is not connected to the Internet.
In such as situation, you must use the local login admin user name and default password
(see Log in to the access point/router when it is not connected to the Internet on page
28).
To log in to the access point/router when it is connected to the Internet:
1.
Open a web browser from a computer or mobile device that is connected either
directly to the access point/router network or to the same network as the access
point/router.
A direct connection to the access point/router network, which is the most common
type of setup, can be through WiFi or over Ethernet:
•
WiFi. A connection from a computer or mobile device to a WiFi network on the
access point/router.
•
Ethernet. A connection from a computer over an Ethernet cable to one of the
LAN ports on the access point/router, either with or without a switch or hub
between the computer and the access point/router.
2.
Do one of the following:
•
Directly connected. Enter http://www.routerlogin.net in the address field.
•
Connected to the same network but not directly connected. Enter the IP
address that was assigned to the access point/router by your existing router
during the setup process. If you do no know the IP address, see Find the IP address
of the access point/router on page 29.
The Sign-In page displays. You are prompted to sign in with your NETGEAR account.
3.
Click the Login button.
The NETGEAR Account Login page displays.
4.
Enter your registered email address and password and click the LOG IN button.
The BASIC Home page of the local browser interface displays. You can now change
the settings of the access point/router.
The BASIC Home page displays a dashboard that lets you see the status of your
access point/router at a glance.
User Manual27Install and Access the Access
Point/Router in Your Network
AC2000 802.11ac Wireless Access Point/Router WAC124
Loading ...
Loading ...
Loading ...