Loading ...
Loading ...
Loading ...
8.
Follow the directions of your browser to save the file.
Restore the access point/router configuration settings
If you backed up the configuration file, you can restore the configuration settings from
this file.
To restore configuration settings that you backed up:
1.
Open a web browser from a computer or mobile device that is connected to the
access point/router network.
2.
Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The Sign-In page displays. You are prompted to sign in with your NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 28).
3.
Click the Login button.
The NETGEAR Account Login page displays.
4.
Enter your registered email address and password and click the LOG IN button.
The BASIC Home page displays.
5.
Select ADVANCED > Administration > Backup Settings.
The Backup Settings page displays.
6.
Click the Choose File button and navigate to and select the saved configuration file.
The backup file ends in .cfg.
7.
Click the Restore button.
A warning pop-up window opens
8.
Click the OK button.
The configuration is uploaded to the access point/router. When the restoration is
complete, the access point/router reboots. This process takes about two minutes.
User Manual136Maintain and Monitor the Access
Point/Router
AC2000 802.11ac Wireless Access Point/Router WAC124
Loading ...
Loading ...
Loading ...