Loading ...
Loading ...
Loading ...
•
Connect over Ethernet to the same network. Using an Ethernet cable, connect
the LAN port on your computer to the same router that the access point/router
is connected to. You can connect your computer either directly or through a
switch or hub to the router.
•
Connect over Ethernet directly to the access point/router. Using an Ethernet
cable, connect the LAN port on your computer directly to any of the four LANs
port on the access point/router.
5.
Launch a web browser and enter http://www.routerlogin.net in the address field.
The Sign-In page displays.
Note: If the Sign-In page does not display, see Access point mode: You cannot log
in to the access point/router on page 245.
6.
If the Sign-In page displays the ! A new firmware upgrade is available. Click here
to get it. button, do the following:
a.
Click the ! A new firmware upgrade is available. Click here to get it. button.
The access point/router finds the new firmware information and displays a
message asking if you want to download and install it.
b.
Click the Yes button.
The access point/router locates and downloads the firmware and begins the
update.
The Firmware Upgrade Assistant page displays while the firmware of the access
point/router is being updated. During the update, do not turn off the power or
press the Reset button. The update process takes about three minutes, after
which the access point/router restarts.
c.
If the Sign-In page does not display, launch a web browser and enter
http://www.routerlogin.net in the address field.
7.
Depending on whether you already own a MyNETGEAR account, do one of the
following:
•
You already own a MyNETGEAR account. Do the following:
a.
Click the Login button.
The NETGEAR Account Login page displays.
b.
Enter your registered email address and password and click the LOG IN
button.
User Manual19Install and Access the Access
Point/Router in Your Network
AC2000 802.11ac Wireless Access Point/Router WAC124
Loading ...
Loading ...
Loading ...