Loading ...
Loading ...
Loading ...
To change the DHCP pool of IP addresses that the access point/router assigns:
1.
Open a web browser from a computer or mobile device that is connected to the
access point/router network.
2.
Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The Sign-In page displays. You are prompted to sign in with your NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 28).
3.
Click the Login button.
The NETGEAR Account Login page displays.
4.
Enter your registered email address and password and click the LOG IN button.
The BASIC Home page displays.
5.
Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
6.
Make sure that the Use Router as DHCP Server check box is selected.
This check box is selected by default.
7.
Specify the range of IP addresses that the router assigns for the LAN subnet:
•
In the Starting IP Address field, enter the lowest number in the range.
This IP address must be in the same LAN subnet.
•
In the Ending IP Address field, enter the number at the end of the range of IP
addresses.
This IP address must be in the same LAN subnet.
8.
Click the Apply button.
Your settings are saved.
User Manual115Manage the Network Settings
AC2000 802.11ac Wireless Access Point/Router WAC124
Loading ...
Loading ...
Loading ...