Loading ...
Loading ...
Loading ...
ILCE-9
d-830-100-11 (1)
C:\d830100111\d830100111ILCE9UC2\01GB-ILCE9UC2\030BAS.indd
2019/02/19 10:01
GB
136
Using flash (sold separately)
In dark environments, use the flash to light up the subject while shooting.
Also use the flash to prevent camera-shake.
For details on the flash, refer to the instruction manual for the flash.
1
Attach the flash
(sold separately) to the
product.
2
Shoot after you have turned on the flash and it is fully charged.
blinking: Charging is in progress
lit up: Charging is finished
• The available flash modes depend on the shooting mode and
function.
Note
• A flash cannot be used when [ Shutter Type] is set to [Electronic Shutter].
• A flash can be used during continuous shooting with [
Shutter Type] set to
[Auto]. The mechanical shutter will be used.
• The light of the flash may be blocked if the lens hood is attached and the
lower part of a recorded image may be shaded. Remove the lens hood.
• When using the flash, stand 1 m or more away from the subject.
• You cannot use the flash when recording movies. (You can use an LED light
when using a flash (sold separately) with an LED light.)
• Before attaching/removing an accessory such as a flash to/from the Multi
Interface Shoe, turn off the product first. When attaching an accessory, make
sure that the accessory is fixed securely to the product.
Loading ...
Loading ...
Loading ...