Loading ...
Loading ...
Loading ...
76
Index
Appendix
Errors and Warnings
Troubleshooting
Settings
Playback
Shooting
Setup and Basics
Learning About the Camera
Accessories
Wireless Features
Wireless Features/Accessories
Customizing Shooting Information Display
● The information displayed when you press the button can be
thoroughly customized by choosing [ 4] tab → [Shooting info. disp.] →
[Screen info. settings].
● For a smaller grid pattern, choose [
4] tab → [Shooting info. disp.] →
[Grid display].
● To switch from a brightness histogram to an RGB histogram or
adjust the display size, choose [
4] tab → [Shooting info. disp.] →
[Histogram disp].
● The viewnder display format can be changed by choosing [
4] tab →
[VF display format].
Customizing Playback Information Display
● An example of customized display is shown at left on the display
customization screen.
● To display Creative Assist setting details, add a [
] mark to [2] in [ 4]
tab → [Playback information display]. The information is now displayed
when you press the button.
Adjusting the Touch-Screen Panel
● Increase the sensitivity of the touch-screen panel if gestures are not
easily detected.
● Take the following precautions when using the touch-screen panel.
- The screen is not pressure sensitive. Do not use sharp objects such
as ngernails or ballpoint pens for touch operations.
- Do not perform touch-screen operations when your ngers are wet.
- If you perform touch-screen operations when the screen or your
ngers are wet, the camera may not respond, or it may malfunction.
In this case, turn the camera off and dry the screen with a cloth.
- Do not apply screen protectors or adhesive lm purchased
separately. This may reduce the responsiveness of touch operations.
● The camera may be less responsive if you perform touch operations
quickly when the setting is set to [Sensitive].
● Regardless of the option selected in this setting, shots may be
numbered consecutively after the last number of existing images on
newly inserted memory cards. To start saving shots from 0001, use an
empty (or formatted) memory card.
Formatting Memory Cards
● Formatting or erasing data on a memory card only changes le
management information on the card and does not erase the data
completely. When disposing of or transferring ownership of memory
cards, take steps to protect personal information if necessary, as by
physically destroying cards.
● The total card capacity indicated on the formatting screen may be less
than the advertised capacity.
Low-Level Formatting
● Low-level formatting takes longer than initial formatting, because data
is erased from all storage regions of the memory card.
● You can cancel low-level formatting in progress by choosing [Cancel].
In this case, all data will be erased, but the memory card can be used
normally.
Using Eco Mode
● The screen darkens about two seconds after you stop using the
camera. About ten seconds later, the screen turns off. The camera
turns off after approximately three minutes of inactivity.
● To activate the screen and prepare for shooting when the screen is off,
press the shutter button halfway.
Power-Saving Adjustment
● To conserve battery power, you should normally choose [ 2] tab →
[Power saving] → [Auto power off] → [1 min.], and set [Display off] to
[1 min.] or less.
● [Display off] and [Auto power off] are not available when Eco mode is
set to [On].
Loading ...
Loading ...
Loading ...