2680C021 Canon Cameras

User Manual - Page 49

For 2680C021.

PDF File Manual, 96 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
49
Index
Appendix
Errors and Warnings
Troubleshooting
Settings
Playback
Shooting
Setup and Basics
Learning About the Camera
Accessories
Wireless Features
Wireless Features/Accessories
Correct camera shake by using a lens with built-in image stabilization.
Lenses with built-in image stabilization are named with “IS.” IS stands
for Image Stabilizer.
Holding the Camera
If you have raised the ash, do not rest your ngers on it.
On/Off
When an EF-M lens is attached to the camera and the power is off, the
aperture narrows to reduce the amount of light entering the camera
and protect the internal components of the camera. Accordingly, the
camera makes a small noise when turned on or off as the aperture is
adjusted.
The sensor is cleaned when the camera is turned on or off, which
may also make a small noise. Even when the camera is off, [
] is
displayed as the sensor is cleaned. However, the [ ] icon may not be
displayed if you switch the camera on and off quickly in succession.
To switch to a shooting mode during playback, press the shutter button
halfway, press the
button or movie button, or turn the mode dial.
Using a Lens
Zooming should be done before focusing. The focus may change slightly
if you turn the zoom ring after a subject is in focus.
To protect the lens, keep the lens cap on when the camera is not in
use.
Some lenses may cause vignetting if the built-in ash is used.
Tips for avoiding dust and smudges
- When changing lenses, do it quickly in a place with minimal dust.
- When storing the camera with the lens removed, always attach the
camera cap.
- Wipe off any dust or dirt on the camera cap before you attach it.
Since the image sensor size is smaller than the 35mm lm format, it will
look like the lens focal length is increased by approx. 1.6x. For example,
the focal length of a 15-45mm lens is approximately equivalent to a focal
length of 24-72mm on a 35mm camera.
Attaching EF and EF-S Lenses
To use EF and EF-S lenses, attach the optional Mount Adapter
EF-EOS M.
When carrying or using a camera with a lens that is heavier than the
camera, support the lens.
Adapters may extend the minimum focusing distance or affect the
maximum magnication or shooting range of the lens.
If the front part (focusing ring) of the lens rotates during autofocusing,
do not touch the rotating part.
The focus preset and power zoom features of some super telephoto
lenses are not supported.
When using a tripod while the adapter is attached to the camera, use
the tripod mount included with the adapter. Do not use the camera’s
tripod socket.
With EF lenses that incorporate a tripod mount (such as super
telephoto lenses), attach the tripod to the tripod mount on the lens.
Loading ...
Loading ...
Loading ...