Loading ...
Loading ...
Loading ...
62
Index
Appendix
Errors and Warnings
Troubleshooting
Settings
Playback
Shooting
Setup and Basics
Learning About the Camera
Accessories
Wireless Features
Wireless Features/Accessories
Safety FE
● When there is a risk of overexposure, the camera automatically
adjusts the ISO speed for ash shots to reduce washed-out highlights
and shoot at optimal exposure. However, you can deactivate automatic
adjustment of the ISO speed by choosing [ 1] tab → [Flash control]
→ [Safety FE] → [Disable].
Adjusting the Flash Exposure Compensation
● You can also congure the ash exposure compensation by
choosing [ 1] tab → [Flash control] → [Built-in ash settings] →
[ exp. comp.].
● You can also access the [Built-in ash settings] screen as follows.
- When the ash is up, press the
button and immediately press the
button.
- Press the
button, and then touch [ ].
Shooting with FE Lock
● FE: Flash Exposure
● The metering range is shown by a circle in the center of the screen
when FE is locked.
● [
] blinks when standard exposure is not possible, even if you press
the button to re the ash. Enable FE lock by pressing the
button when subjects are within ash range.
Changing the Flash Timing
● [1st curtain] is used whenever the shutter speed is 1/100 or faster,
even if you select [2nd curtain].
Changing the Flash Metering Mode
● When using [Average], adjust ash exposure compensation to suit the
shooting conditions.
● Mount the camera on a tripod or take other measures to keep it
still and prevent camera shake. In this case, also disable image
stabilization (
=
62).
● Even after the ash res, ensure that the main subject does not move
until the shutter sound is nished playing.
Other Settings
Changing the IS Mode Settings
● The following [IS mode] items are available.
On
Corrects camera movement or camera shake using
built-in image stabilization performed by the lens.
Off Deactivates image stabilization.
● Image stabilization is only applied at the moment of shooting in
[ ]
mode, regardless of the lens IS setting.
● If image stabilization cannot prevent camera shake, mount the camera
on a tripod or take other measures to hold it still. Additionally, you
should set [IS mode] to [Off] when using a tripod or other means to
secure the camera.
● [IS mode] is not displayed for lenses other than EF-M lenses. Use the
image stabilization switch on the lens instead.
Loading ...
Loading ...
Loading ...