Loading ...
Loading ...
Loading ...
50
TROUBLESHOOTING
Operation
LE
Motor trouble
• Call for service if the same problem occurs again.
NE
Vario motor trouble
• Call for service if the same problem occurs again.
Symptoms Possible Cause & Solution
Symptoms Possible Cause & Solution
Noise Some level of noise is normal during operation.
• Detergent cover opening.
• Drain pump at the beginning of drain cycle.
The appliance is not level.
• Adjust leveling feet.
Nozzle arm knocking against dishes.
• Reposition the dishes.
Water pressure is too high.
• Adjust water pressure.
Appliance will not
operate.
Door is not completely closed.
• Level the appliance again.
Power supply or power cord is not connected.
• Connect the power supply or cord properly.
When the Control Lock feature is activated, the display code
CL
will show
on the display.
• Deactivate the
Control Lock
button.
• Press and hold
Half Load
and
Energy Saver
simultaneously for 3 seconds
to activate or deactivate this feature.
Fuse is blown or circuit breaker tripped.
• Replace the fuse or reset the circuit breaker.
Appliance
continuously beeps
when the door is
opened, during or right
after a cycle has
completed.
The contents of the appliance are hot and care should be used when
placing your hands inside the appliance.
• Close the door until the appliance and dishes have cooled down. The
beeping will stop if the door is closed or the interior temperature has
cooled.
Loading ...
Loading ...
Loading ...