Loading ...
Loading ...
Loading ...
39
OPERATION
ENGLISH
of different sizes. Remove dishes before adjusting
the tray. Adjust the tray by sliding the lever.
Removing the Cutlery Rack
The entire cutlery rack can be removed if more
space is needed on the upper rack for larger items.
Always remove the cutlery from the rack before
removing the rack.
Pull the rack out to the end of the rails. Then, lift the
front of the rack so that the rollers clear the stop on
the end of the rail. The rack can now be slid forward
and removed from the rails.
WARNING
• Be careful when loading and unloading items
with sharp edges. Load sharp knives with the
blade down to reduce the risk of injury.
Adding Cleaning Agents
Adding Detergent to the
Dispenser
• Remove the label on the dispenser prior to
running the appliance for the first time.
• The amount of detergent needed depends on
the cycle, load size, and soil level of dishes.
• Put detergent into the detergent compartment
before starting any cycle, except the
Rinse
cycle.
1
Push the button on the dispenser lid to open
the cover.
2
Add dishwashing detergent to the main wash
compartment until the level is between the
lines marked 15 and 25.
• Fill to over the 25 line for hard water or
heavily soiled loads.
• Fill to the 15 line for soft water or lightly
soiled loads.
3
Push the detergent lid to slide the lid closed
until it clicks.
4
If a prewash is desired, fill the recessed
prewash compartment area on the lid with
detergent.
۱٥
۲٥
Loading ...
Loading ...
Loading ...