Loading ...
Loading ...
Loading ...
15
INSTALLATION
ENGLISH
Adjusting Back Levelling Feet
• Use a phillips screwdriver to adjust the rear
levelling foot and the rear of the tub using the
centre screw at the base of the appliance in the
front.
• Turn the centre screw clockwise to raise the rear
of the tub and counterclockwise to lower it.
NOTE
• To avoid damaging the screw, do not use an
electric screwdriver.
Case 1. The Door is Slanted to the
Right
1
Unscrew (counter-clockwise) the front left leg
and correct the level.
2
Check the opening of door and repeat if
necessary until the door opens and closes
properly.
Case 2. The Door is Slanted to the
Left
1
Unscrew (counter-clockwise) the front right leg
and correct the level.
2
Check the opening of door and repeat if
necessary until the door opens and closes
properly.
Securing Dishwasher to Cabinet
Framework
1
Remove the 2 plastic caps from the mounting
bracket access holes.
2
Drive a wood screw (Φ 4.5 x 12 mm) through
the mounting bracket and into the cabinet
frame.
3
Reinstall the plastic caps.
NOTE
• External water leakage could result if the
installation of the screws to the surrounding
timber cabinet is not done correctly.
Loading ...
Loading ...
Loading ...