Loading ...
Loading ...
Loading ...
25
OPERATION
ENGLISH
Setting the Rinse Aid Level
The dispenser has five adjustment levels. The
default programme is rinse aid level 2. This can be
checked and altered by using the buttons on the
control panel.
1
Ensure the appliance is off.
2
Press
Power
and
Dual Zone
simultaneously to
check the current setting.
3
Press
Delay Start
to change the rinse aid
dispenser setting. Each press of the button
changes the setting one step from L0(off) to L4.
4
Once the desired rinse aid dispenser setting is
selected, press
Start
to save.
• The power turns off after saving.
CAUTION
• If the rinse aid lid is not closed properly, a large
amount of rinse aid will release into the tub and
cause washability problems.
NOTE
• The
Rinse Aid Refill
e
icon will illuminate when
more rinse aid is needed.
• If you notice cloudy spots, streaks or water
marks on the glassware after washing, increase
the setting level.
• Setting the control too high can cause foaming,
which will cause poor wash results.
• If the glass is smeared or foam is present on the
bottom, decrease the level setting.
• Setting the rinse aid control too low can cause
spotting and streaking on dishes and poor
drying results.
Loading ...
Loading ...
Loading ...