Loading ...
Loading ...
Loading ...
29
OPERATION
ENGLISH
Delay Start
This feature delays the start of a selected cycle.
Each time the
Delay Start
button is pressed, the
delay time increases by an hour. The delay time can
be set from 1 to 12 hours, in one-hour increments.
• To cancel this feature, turn the power off.
• To change the cycle and cycle option, open the
door and then select another cycle and cycle
option. The countdown will continue.
Control Lock
This feature helps prevent settings from being
changed during a cycle. Selecting this feature locks
all of the buttons, except for the
Power
button, on
the control panel. This feature does not lock the
door.
• On models with the external display, while a
cycle is running, press and hold
Half Load
and
Energy Saver
simultaneously for 3 seconds to
activate or deactivate this feature. On models
with a concealed display, open the door during
operation and follow the same instruction.
• When this feature is activated, the display code
CL
will show on the display.
• To start a new cycle, deactivate this feature.
• This feature can be set at any time by turning on
the appliance.
Wi-Fi
Press and hold
Delay Start
for 3 seconds to
connect to the network. Refer to
SMART
FUNCTIONS
sections for detailed information
about this feature.
Auto Open Dry
This feature may vary depending on the model
purchased.
The door will open automatically at the end of a
programme that includes drying in order to
enhance drying results.
• To activate or deactivate this feature, press and
hold the
Energy Saver
button and the
High
Temp
button simultaneously for 3 seconds.
• This feature is not available when the
Machine
Clean
and
Rinse
cycle is selected.
• When you select the
Download Cycle
, this
feature may operate even if the feature is
deactivated. Because the
Download Cycle
is
designed to achieve the best results in a specific
purpose regardless of appliance settings.
• The display shows whether this feature is on or
off.
WARNING
• Keep children away from the appliance while the
appliance is operating. Exposure to high
temperature steam may cause scalding or
burns.
SignaLight™
This feature may vary depending on the model
purchased.
SignaLight™ shows the status of the appliance,
whether it has encountered any problems,
whether it is operating normally, or whether it is
ready to wash dishes.
• Depending on the model, the lamp may be
located either on the front of the appliance or
the top of the door.
Red (left)
The red lamp flashes when the appliance
encounters an error. For more information about
the error, see the
Error Code
part of the
TROUBLESHOOTING
section.
Loading ...
Loading ...
Loading ...