Loading ...
Loading ...
Loading ...
48
MAINTENANCE
7
After assembly, check whether the spray arms
rotate freely.
Cleaning the Water Supply Hose
Filter
1
Unplug the appliance.
2
Turn off the water tap.
3
Unscrew the water supply hose.
4
Remove the seal and the plastic filter with a
pair of small pliers or scissor grips.
5
Refit the filter and gasket and make sure that it
is sitting correctly.
6
Refit and secure the water supply hose in
reverse order. Do not use any mechanical
device to tighten the hose. A soft cloth can be
used to assist hand tightening.
NOTE
• A filter is fitted into the inlet of the water supply
hose connection.
• If insufficient water flows into the appliance,
check that the filter is not blocked.
• If there is a leak, the water supply hose will need
to be checked for proper connection.
• Never over tighten the water supply valve or use
mechanical devices to tighten.
• When reassembling the seal and the filter,
ensure that they free from dirt or grit that may
have come from the water supply.
Seasonal Maintenance and
Storage
• If you will be absent for an extended period of
time during warmer months, close the water
valve and unplug the power cord, or turn off the
circuit breaker. Clean the filter, tub and
dispenser to prevent odour.
• If you will be absent for an extended period of
time during colder months and there is a
possibility of freezing temperatures, winterize
the water supply lines and the appliance itself.
Winterization must be performed by qualified
service personnel.
Loading ...
Loading ...
Loading ...