Loading ...
Loading ...
Loading ...
16
EN
Leveling the Appliance
If the floor is uneven, turn the adjustable feet as
required (Do not insert pieces of wood etc. under
the feet). Make sure that all four feet are stable
and resting on the floor and then check that the
appliance is perfectly level.
Diagonal Check
When pushing down the edges of the appliance
top plate diagonally, the appliance should not
move up and down at all (Check both directions). If
the appliance rocks when pushing the machine top
plate diagonally, adjust the feet again.
NOTE
• Timber or suspended type flooring will
contribute to excessive vibration and unbalance.
Re enforcement or bracing of the timber floor
may need to be considered to stop or reduce
excessive noise and vibration.
• Do not install the washing machine on any
elevated surface, stand or plinth as it can
become unstable and fall causing serious injury
and damage.
• If the washing machine is installed on a uneven,
weak or tilted floor causing excessive vibration,
spin failure or UE error can occur. It must be
placed on a firm and level floor to prevent spin
failure.
Assembling the Anti-Rat
Cover (some models only)
Insert the Anti-Rat cover to the assembling hole
from the front or back of the washing machine.
Type 1
Type 2
Loading ...
Loading ...
Loading ...