Loading ...
Loading ...
Loading ...
5. Push and release the up or down arrow but-
ton to exit the submenu screen.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator sys-
tem did not reset. If necessary, repeat this
procedure.
Secondary Method Of Resetting Engine Oil Life
1. Without pressing the brake pedal, push the
ENGINE ST AR T/STOP button and place the
ignition to the ON/RUN position (do not start
the engine).
2. Fully press the accelerator pedal, slowly,
three times within ten seconds.
3. Without pushing the brake pedal, push the
ENGINE START/STOP button once to return
the ignition to the OFF/LOCK position.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator sys-
tem did not reset. If necessary, repeat this
procedure.
Performance Shift Indicator (PSI) —
If Equipped
The Performance Shift Indicator (PSI) is en-
abled on vehicles with manual transmission, or
when a vehicle with automatic transmission is
in manual shift mode. The PSI provides the
driver with a visual indication within the instru-
ment cluster display when the driver configured
gear shift point has been reached and the driver
is still accelerating. This indication notifies the
driver to change gear corresponding to the con-
figured RPMs in the head unit.
Instrument Cluster Display Selectable
Menu Items
Push and release the up or down arrow button
until the desired Selectable Menu item is dis-
played in the instrument cluster display.
Follow the Menu or submenu prompts as de-
sired.
Refer to “Instrument Cluster Display” in “Get-
ting To Know Y our Instrument Panel” in the
Owner’s Manual for further information.
WARNING LIGHTS AND MESSAGES
The warning/indicator lights will illuminate in
the instrument panel together with a dedicated
message and/or acoustic signal when appli-
cable. These indications are indicative and pre-
cautionary and as such must not be considered
as exhaustive and/or alternative to the informa-
tion contained in the Owner’ s Manual, which
you are advised to read carefully in all cases.
Always refer to the information in this chapter in
the event of a failure indication. All active tell-
tales will display first if applicable. The system
check menu may appear different based upon
equipment options and current vehicle status.
Some telltales are optional and may not appear .
GETTING TO KNOW YOUR INSTRUMENT PANEL
54
Loading ...
Loading ...
Loading ...