Loading ...
Loading ...
Loading ...
Automatic Transmission — If Equipped
Launch Mode is only available when the follow-
ing procedure is followed:
1. Push the LAUNCH button on the center
stack switch bank.
NOTE:
Pushing the SR T button on the center stack
or pressing Race Options within Drive
Modes, then selecting the Launch Control
tab, followed by the soft, Launch Control
button are two other options to access
launch control features. Please refer to “SRT
Drive Modes” in “Multimedia” in the Own-
er’s Manual for further information.
2. Slide the RPM slider bar on the touchscreen.
This screen will allow you to adjust your
launch RPM’s for optimum launch/traction.
3. Press the “Activate Launch Mode” button on
the touchscreen.
4. Make sure the vehicle is not moving.
5. Make sure the steering wheel is pointing
straight.
6. Hold the brake and make sure the vehicle is
in “DRIVE”.
7. While holding the brake, rapidly apply and
hold the accelerator pedal to wide open
throttle. The engine speed will hold at the
RPM that was set in the “Launch RPM
Set-up” screen.
NOTE:
Messages will appear in the instrument cluster
to inform the driver if one or more of the above
conditions have not been met.
8. When conditions 4 through 7 have been
met, the instrument cluster display will read
“Launch Ready Release Brake”.
9. Keep the vehicle pointed straight.
Launch mode will be active until the vehicle
reaches 62 mph (100 km/h), at which point the
ESC system will return to its current ESC mode.
Launch mode will abort before launch comple-
tion, display “Launch Aborted” in the cluster
under any the following conditions:
• The accelerator pedal is released during
launch.
• The ESC system detects that the vehicle is no
longer moving in a straight line.
• The “ESC OFF” button is pushed to change
the system to another mode.
NOTE:
After launch mode has been aborted, ESC will
return to its current ESC mode.
Manual Transmission — If Equipped
V ehicles with a manual transmission have an
adjustable launch RPM controlled through the
Uconnect system.
Launch Mode is only available when the follow-
ing procedure is followed:
1. Push the LAUNCH button on the center
stack switch bank.
NOTE:
Pushing the SR T button on the center stack
or pressing the “Apps” button on the touch-
screen are two other options to access
launch mode features. Please refer to
“Uconnect Settings” in “Multimedia” in
your Owner’ s Manual or the “Drive Modes
Supplement”, for further information.
2. Slide the RPM slider bar on the touchscreen.
This screen will allow you to adjust your
launch RPM’s for optimum launch/traction.
121
Loading ...
Loading ...
Loading ...