Loading ...
Loading ...
Loading ...
To Turn Off The Engine Using ENGINE
START/STOP Button — Manual Transmis-
sion Only
1. With the vehicle stopped, place the gear
selector in NEUTRAL, then push and release
the ENGINE START/STOP button.
2. The ignition will return to the OFF mode.
3. Place the gear selector in first gear or RE-
VERSE and then apply the parking brake.
NOTE:
• If the ignition switch is left in the ACC posi-
tion, the system will automatically time out
after 30 minutes of inactivity and the ignition
will switch to the OFF position.
• If the ignition switch is left in the RUN posi-
tion, the system will automatically time out
after 30 minutes of inactivity if the vehicle
speed is 0 mph (0 km/h) and the engine is not
running.
• If the vehicle speed is above 5 mph (8 km/h),
the ENGINE ST ART/STOP button must be
held for two seconds or three short pushes in a
row before the engine will shut off. The igni-
tion switch position will remain in the ACC
position until the vehicle is stopped, placed in
park and the button is pushed twice to the
OFF position.
To Turn Off The Engine Using ENGINE
START/STOP Button — Automatic Transmis-
sion Only
1. Place the gear selector in P ARK, then push
and release the ENGINE ST ART/STOP
button.
2. The ignition will return to the OFF mode.
3. If the gear selector is not in P ARK, the
ENGINE ST AR T/STOP button must be held
for two seconds or three short pushes in a
row with the vehicle speed above 5 mph
(8 km/h) before the engine will shut off. The
ignition will remain in the ACC mode until
the gear selector is in P ARK and the button
is pushed twice to the OFF mode. If the gear
selector is not in P ARK and the ENGINE
START/STOP button is pushed once, the
instrument cluster will display a “V ehicle
Not In Park” message and the engine will
remain running. Never leave a vehicle out of
the PARK position, or it could roll.
NOTE:
If the ignition switch is left in the ACC or RUN
(engine not running) position and the transmis-
sion is in P ARK, the system will automatically
time out after 30 minutes of inactivity and the
ignition will switch to the OFF position.
AutoPark
AutoPark is a supplemental feature to assist in
placing the vehicle in P ARK should the situa-
tions on the following pages occur . It is a back
up system and should not be relied upon as the
primary method by which the driver shifts the
vehicle into PARK.
The conditions under which AutoPark will en-
gage are outlined on the following pages.
WARNING!
• Driver inattention could lead to failure to
place the vehicle in P ARK. ALW AYS DO A
VISUAL CHECK that your vehicle is in
PARK by verifying that a solid (not blink-
ing) “P” is indicated in the instrument
cluster display and on the gear selector . If
the "P" indicator is blinking, your vehicle is
STARTING AND OPERATING
112
Loading ...
Loading ...
Loading ...