User Manual - Page 30

For 2019 DODGE CHALLENGER SRT.

Loading ...
Loading ...
Loading ...
WARNING!
Do not place anything on the steering
wheel that insulates against heat, such as
a blanket or steering wheel covers of any
type and material. This may cause the
steering wheel heater to overheat.
EXTERIOR LIGHTS
Headlight Switch
The headlight switch is located on the left side
of the instrument panel. This switch controls
the operation of the headlights, parking lights,
instrument panel lights, instrument panel light
dimming, interior lights and fog lights (if
equipped).
Rotate the headlight switch clockwise to the
first detent for parking light and instrument
panel light operation. Rotate the headlight
switch to the second detent for headlight, park-
ing light and instrument panel light operation.
Push the switch to enable fog lights (if
equipped).
Multifunction Lever
The multifunction lever controls the operation
of the turn signals, headlight beam selection
and passing lights. The multifunction lever is
located on the left side of the steering column.
Daytime Running Lights (DRL)
If Equipped
The Daytime Running Lights will turn on when
the engine is started and will remain on unless
the headlamps are turned to the on position, the
parking brake is applied, or the engine is shut
OFF.
NOTE:
If allowed by law in the country in which the
vehicle was purchased, the Daytime Running
Lights can be turned on and off using the
Uconnect System, refer to “Uconnect Settings”
in “Multimedia” in your Owner’ s Manual for
further information.
High/Low Beam Switch
Push the multifunction lever away from you to
switch the headlights to high beam. Pull the
multifunction lever toward you to switch the
headlights back to low beam.
Headlight Switch
1 Rotate Headlight Switch
2 Rotate Instrument Panel Dimmer
3 Rotate Ambient Light Dimmer
4 Push Front Fog Lights
GETTING TO KNOW YOUR VEHICLE
28
Loading ...
Loading ...
Loading ...