Loading ...
Loading ...
Loading ...
24-02-2003
INSTRUMENTS AND CONTROLS
30
Handbrake, low brake
fluid and Electronic
Brake Force Distribution
system fault warning
light
Linked to the central (STOP) warning
light.
This indicates one of the following:
– that the handbrake is applied or
not fully released,
– an excessive drop in brake fluid
level (if the warning light remains
on even when the handbrake is
released).
– a fault in the Electronic Brake
Force Distribution system, if lit at
the same time as the ABS warning
light.
You must stop.
Consult a PEUGEOT dealer.
INSTRUMENTS AND CONTROLS
A permanently lit warning light or
one flashing, with the engine run-
ning, indicates an operating fault
of the unit concerned. The illumi-
nation of certain warning lights
may be accompanied by an audi-
ble signal and a message on the
multifunction display. Do not
ignore this warning: consult a
PEUGEOT dealer as soon as
possible.
If the central STOP warning light
comes on when you are driving,
stop your vehicle immediately,
where it is safe to do so.
Anti-lock braking
system (ABS) warning
light
This comes on for 3 seconds each
time the ignition is switched on.
If the warning light remains on or
comes on above 12 km/h, this indi-
cates an ABS malfunction.
However, the vehicle retains conven-
tional servo-assisted braking.
Lighting of this warning light is
accompanied by an audible signal
and the message "ABS fault" on the
multifunction display.
Consult a PEUGEOT dealer.
Coolant temperature and
low coolant level warning
light
Linked to the central (STOP) warning
light.
You must stop.
Wait for the engine to cool before top-
ping up the level.
The cooling circuit is pressurised.
In the event of breakdown and to
prevent any risk of burns, unscrew
the cap by two turns to allow the
pressure to drop.
When the pressure has dropped,
remove the cap and top up the level.
Consult a PEUGEOT dealer.
Central (STOP)
warning light
Linked to the "engine
oil pressure", "coolant temperature
and low coolant level", "handbrake",
"low brake fluid level" and "electronic
brake force distribution system fault"
warning lights.
You must stop if the light flashes
with the engine running.
Consult a PEUGEOT dealer.
Engine oil pressure
and temperature
warning light
Linked to the central (STOP) warning
light.
You must stop.
This warning light indicates one of
the following:
– insufficient oil pressure,
– a lack of oil in the lubrication cir-
cuit. Top up the level.
– an oil temperature which is too
high. The warning light is acom-
panied by an audible signal. To
lower the oil temperature, reduce
your speed.
Consult a PEUGEOT dealer.
Loading ...
Loading ...
Loading ...