Loading ...
Loading ...
Loading ...
24-02-2003
PRACTICAL INFORMATION
125
Rear lights (saloon)
Release the top of the boot side
trim.
Unscrew the wing bolt inside the
boot using the wheelbrace if neces-
sary.
Disconnect the connector A.
Release the light unit.
Release spanner B from the bulb
holder.
Unscrew nut C using spanner B and
remove the bulb holder.
Change the faulty bulb.
When refitting, stow spanner B on
support D and refit the light.
Saloon 206 SW
1. Direction indicators
PY 21 W (saloon)
P 21 W (206 S W).
2. Reversing lights P 21 W.
3. Brake lights/side lights
P 21/5 W.
The amber bulbs must
be replaced by bulbs of
identical specification
and colour.
Rear lights (206 SW)
Unclip the top of the boot trim using
a coin.
Unscrew the two wing bolts using
the wheelbrace if necessary.
Release the light unit.
Disconnect the connector.
Move aside the tabs 1 and remove
the bulb holder 2.
Change the faulty bulb.
When refitting, refit the boot trim by
engaging it from the bottom then
clipping the top.
Loading ...
Loading ...
Loading ...