Loading ...
Loading ...
Loading ...
24-02-2003
PRACTICAL INFORMATION
123
Side lights W 5 W
Turn the pin connector B a quarter turn and remove it.
Change the bulb.
Single unit headlamp H4 55/60 W
– Disconnect the connector.
– Remove the rubber protector.
– Press the two ends of the securing clip to release it.
Change the bulb A.
– On fitting, ensure that the direction notches are in the
correct position and that the clip is secured correctly.
– Refit the rubber protector carefully.
– Reconnect the connector.
Double unit headlamp H7 55 W
– Pull tab C upwards and remove the protective cover.
– Disconnect the connector.
– Press the end of the securing clip to release it. Change
the faulty bulb.
– On fitting, ensure that the direction notches are in the
correct position and that the clip is secured correctly.
– Reconnect the connector.
– Refit the protective cover.
CHANGING A BULB
Dipped/main beam headlamps
Note
– Only touch the bulbs with a dry cloth.
– To change the bulbs on the right-hand side, remove the windscreen wash reservoir filler pipe first.
– Condensation may form inside the headlamps. It will disappear when they are used.
Loading ...
Loading ...
Loading ...