Loading ...
Loading ...
Loading ...
Installing the outdoor camera
1 Open the interface cover (A), and then
slide the power slide switch to ON (B) .
2 Close the interface cover (C).
3 Secure the safety wire ring to the camera
nut of the camera using a driver (D), and
then pass the safety wire through the ring
of the safety wire ring (E).
4
5
1
2
3
Important:
R M
ake sure to close the interface
cover securely. Water resistance
cannot be assured if the interface
cover is open.
4 D
rive the wall mounting screws into the
wall.
1
Longer than 25 mm (1 inch)
2
Space 2.8 mm (
1
/8
inches)
1 2
Note:
R U
se the following template when
determining the location of the screw
holes.
(1 inch)
25.4 mm
For assistance, please visit http://shop.panasonic.com/support
29
Setup
HN7001(enen)0209ver.140.pdf29 2018/02/0911:33:53
Loading ...
Loading ...
Loading ...