Loading ...
Loading ...
Loading ...
Steam en
23
Refilling the water tank
The way the appliance responds if the water tank runs
dry when the appliance is in operation depends on what
operating mode it is in:
Steam mode: The appliance is stopped and a
message appears on the display.At the highest
steam setting, a tankful of water will last approx. 30-
40 minutes; at the lower steam settings, it will last
much longer.
Steam with microwave: The appliance is stopped. A
tankful of water will last approx. 50 minutes.
Grill with steam: The appliance continues to run in
grill mode; no message appears on the display. At
the highest steam setting, a tankful of water will last
approx. 3 hours; at the lower steam settings, it will
last much longer.
Note: Actual times may vary from those specified.
Refill the water tank up to the "MAX" mark.
1. Open the control panel.
2. Remove and refill the water tank.
3. Insert the filled water tank and close the control
panel.
After every steam operation
Moisture remains in the cooking compartment. Carefully
wipe out the drip channel and the cooking
compartment. Each time you cook using steam, we
recommend that you run the Rinse cleaning function !
afterwards. Then empty and dry the water tank and drip
tray.
Note: Remove limescale marks with a cloth soaked in
vinegar, then wipe with clean water and dry with a soft
cloth.
Emptying the water tank
1. Briefly press on the centre of the tank cover.
The tank cover folds upwards.
2. Remove the water tank.
3. Carefully remove the lid for the water tank.
4. Empty the water tank, clean it with detergent and
then rinse it thoroughly with clean water.
5. Dry all parts with a soft cloth.
6. Rub the seal on the lid until dry.
7. Allow the water tank to dry with the lid open.
8. Place the lid on the water tank and push down on it.
9. Slide the water tank in fully.
10. Close the tank cover and briefly press on the centre
of it.
The tank cover is locked.
Caution!
Do not dry the water tank in the hot cooking
compartment. This will damage the water tank.
Do not clean the water tank in the dishwasher. This
will damage the water tank.
Cleaning the drip trough
1. Allow the appliance to cool down.
2. Open the tank cover.
3. Remove the water tank and drip tray.
4. Wipe around the drip trough underneath the
cooking compartment with a sponge cloth (fig. !).
Drying the cooking compartment
Dry the cooking compartment after operation to ensure
that no moisture remains.
Heating up the cooking compartment
To dry the cooking compartment, it is heated up so that
the moisture in the cooking compartment evaporates.
You will then need to open the appliance door to allow
the steam to escape from the cooking compartment.
1. Allow the appliance to cool down.
2. Remove the worst dirt from the cooking
compartment immediately and wipe away moisture
from the cooking compartment floor.
3. Use the function selector to set Full-surface grill (
4. Touch 0 twice.
The cooking time symbol y is highlighted in the
display.
5. Use the rotary selector to set a cooking time of 15
minutes.
6. Press start l stop to start the operation.
The drying function starts and ends automatically
after 15 minutes.
7. Open the appliance door and leave it open for 1 to 2
minutes so that the moisture in the cooking
compartment can escape.
Drying the cooking compartment by hand
1. Allow the appliance to cool down.
2. Remove any food remnants from the walls of the
cooking compartment.
3. Dry the cooking compartment with a sponge.
4. Leave the appliance door open for 1 hour so that the
cooking compartment dries completely.
D
1
Loading ...
Loading ...
Loading ...