Loading ...
Loading ...
Loading ...
Steam en
21
Setting the steam
Note: If the appliance has not been used for an
extended period, start by running a rinse cycle !.
~ "Cleaning function" on page 30
Example: Steam setting 2: Medium, cooking time
10 minutes.
1. Use the function selector to select the steam
function ".
The appliance is ready to use. The maximum steam
setting and a cooking time of 20 minutes are set as
the default values. The arrow of the water tank
symbol $ flashes.
2. Remove the water tank, fill with fresh water up to the
"max." mark and insert fully in the tank
recess.~ "Filling the water tank" on page 22
3. Touch and hold the " button until you reach the
required setting.
The selected steam setting will be shown on the
display.
4. Use the rotary selector to set the required cooking
time.
Note: You can also adjust the cooking time first and
then the steam setting.
5. Touch the start l stop button.
The arrow of the water tank symbol $ will go out
and the water tank symbol ( will be lit. The
appliance will start. The start l stop LED will be lit.
The cooking time will count down on the display. The
amount of time a tankful of water will last varies
depending on the steam setting. If the water tank
runs out of water while the appliance is in operation,
the appliance is paused and the arrow of the water
tank symbol $ flashes. Fill the water tank with fresh
water up to the "max." mark and touch the
start l stop button to resume operation.
Notes
■ The steam setting can be changed at any time when
the appliance is in operation by pressing the
" button.
■ After cooking with steam, wipe out the drip channel
and the cooking compartment. ~ "After every
steam operation" on page 23
Setting the steam combination
Se t t i n g the st eam combi nat i on
With some types of heating, you can switch on the
steam function.
When you cook with steam assistance, steam is
introduced into the cooking compartment at various
intervals and with varying degrees of intensity. This
gives you a better cooking result.
Your food
■ Becomes crispy on the outside
■ Achieves a glossy surface
■ Is succulent and tender on the inside
■ Only undergoes a minimum reduction in volume
Suitable types of heating
■ ! Microwave
■ ( Grill
Setting combination mode
Example: Full-surface grill ( at setting 2 and steam
setting 2.
1. Use the function selector to set grill mode.
Setting 3 will appear as the default value on the
display.
2. Use the rotary selector to set the required setting.
3. Touch the Steam button " until the required setting
has been selected on the display.
The water tank symbol $ will appear on the display.
4. Refill water tank.
5. Touch the start l stop button.
The appliance will start and the start l stop LED will
be lit.The cooking time will start counting down.
Loading ...
Loading ...
Loading ...