Loading ...
Loading ...
Loading ...
SHS800X&SHS1000X User Manual
169
WWW.SIGLENT.COM
Do the following steps to update the firmware:
1. Insert the USB flash driver which with the firmware and the configure files
inside into the USB host interface on the side panel of the oscilloscope.
2. Press the
Utility button on the front panel to enter the UTILITY function menu.
3. Press the Next Page softkey to go to the third page of the UTILITY function
menu.
4. Press the Update softkey to enter the UPDATE function menu.
5. Press the Firmware softkey to open the file manager.
6. Turn the Universal Knob to select the update file with an ADS postfix; and
then press the Press to Update softkey to start updating the firmware. The
process needs about 4 minutes. And during the update, do not remove
power to the oscilloscope, otherwise the oscilloscope may be permanently
damaged and may not restart again.
7. After the update, the screen will pop-out the message “
Firmware
decompressed. Please restart and wait…”.
8. Restart the oscilloscope to finish the firmware update.
Do the following steps to update the configuration:
1. Insert the USB flash driver which with the firmware and the configure files
inside into the USB host interface on the side panel of the oscilloscope.
2. Press the Utility button on the front panel to enter the UTILITY function menu.
3. Press the Next Page softkey to go to the third page of the UTILITY function
menu.
4. Press the Update softkey to enter the UPDATE function menu.
5. Press the Configure softkey to open the file manager.
6. Turn the Universal Knob to select the update file (*.CFG file extension) and
then press the Press to Update softkey to start update the firmware. The
process needs about 30 seconds.
7. After the update, the screen will pop-out the message “Firmware
decompressed. Please restart and wait…”
8. Restart the oscilloscope to finish the configuration update.
Loading ...
Loading ...
Loading ...